Installing the soft plugs on the block.
Installing the Tappets
Lubing cam and installing in the block.
Torqueing the thrust plate for the cam.
This weeks reflection.were very educational . We installed a cam in the C-6 cummins 8.3 Marine engine we have been working on although we ran into some problems with the new crankshaft. The crankshaft from overseas which was nicely packaged in a sturdy built crate. It greeted us with rust and pitting on the crankshafts machined surface. After careful microscopic analysis we determined it could shorten the life of the engine.Watch the videos and reflect on this weeks lessons.
No comments:
Post a Comment